Machines idling on site for hours
Know which machine is working, which is idling, and what it costs
Track engine hours, idle time and fuel per machine, allocated to the project that is actually using it.
Challenges we solve
No cost allocation per project
Equipment moved without record
What you get
- Equipment utilization tracking
- Idle time monitoring
- Project-based reporting
- Asset allocation
- Machine analytics dashboard
Operational benefits
- Less fuel burnt while stationary
- Accurate project cost
- Longer machine life


How it works
Fit a rugged tracker and CAN adapter
Engine hours and fuel report automatically
Costs are allocated to the active project
What it returns
Idle time on heavy equipment is pure fuel burn; halving it on ten machines is a measurable line in the project budget.
AI capability
Utilisation analytics rank machines by productive share, so redeployment is based on data rather than whoever asks loudest.
Compare platforms
Hour meters read manually, allocated to projects from memory.
Engine hours and fuel logged automatically against the active project.
In practice
A contractor discovered two excavators idling more than 40% of engine hours on the same site.
Concrete mixers: know the drum is turning and the load arrived
A mixer can be on the right road with its drum stopped, or unload before reaching the site. So we monitor the drum itself along with the truck position.
Is the drum turning?
Drum speed and rotation direction throughout the trip, from the plant to the project.
Where did it unload?
The discharge location on the map, compared with the project site to reveal concrete unloaded elsewhere.
How long did it wait?
Arrival, waiting and departure times per project, and the time of every trip.
No wires on the drum
A wireless Eurosens Degree BT sensor mounts outside the drum and sends readings to the tracker over Bluetooth.
Fuel and load
Add actual fuel consumption measurement and axle load monitoring if you need them.
A display for the driver
A cab display shows the required readings to the driver.
Sensor details come from the manufacturer, Eurosens. The final setup depends on the mixer.
Devices for this solution

ALL-CAN 300
Universal CAN adapter reading fuel, mileage and engine data.

Teltonika FMB920 + Temp
Refrigerated transport tracking with temperature sensor support.
Tracker X3
Fuel-theft detection with 99% accuracy on tank level change.
SinoTrack Fuel
Mobile fuel pump control and dispensing monitoring.
Connects with
Ready to see it on your own operation?
Tell us your fleet size or your systems and we will put a proposal together.