S06U tracker specifications:
GEO fence alarm:

This alarm works to set fence alarms by giving orders from SMS messages to allow your car’s safety net to access them.

Remote Oil Cutting Alarm:

This alarm sends an order to discontinue the vehicle due to the separation of the oil from it. The alarm relay also detaches the power of the ignition device of the car, which is achieved by stopping the vehicle from traveling.

ACC detection system:

This system works to find out when the car stops and when it operates, by connecting the car to the ACC line which allows users to view the vehicle’s condition on this system.

The ACC detection when observing a work system indicates that the vehicle engine is busy, and the decommissioning of the ACC system indicates the vehicle engine stop.

Excess Speed Alarm:

This system works when the speed of the vehicle exceeds the excess speed or speed specified for it, thus the excess speed alarm is triggered, by sending an alarm signal to the GPS monitoring system.

Specifications for 4G S06U tracker:
Stop alarm:

This alert works when there is any problem in the car and any system is stopped.

Or when there is any fault with the gps system and it breaks down.

Or when the vehicle enters the armed mode, the device vibrates the vehicle and thus triggers a vibration alarm and sends an alert to the GPS monitoring system.

Remote Listening Feature:

This feature sends a code via SMS to the mobile number in which the device is delivered, and listens to it.

Send SOS alarm:

This system triggers the SOS alarm when you press the button, so it will send alerts and signals to the background of the monitoring system.

It also sends a S06U device alerts when cutting off the vehicle’s oil, an excess speed alarm, a fence alarm, mileage statistics and even an ACC detection, in addition to a power failure alarm.

Instructions for 4G S06U machine wires to follow:

First: The power supply range supported by the device for equipment is voltage 6-30 V.

The power cord provided by the original plant must also be used.

As the red wire in the 4G S06U device is considered the positive pole, the black wire is considered the negative pole.

So when you install the negative pole of the power source you must choose the type of iron conduction.

The ACC line must also be the green wire that connects to the ACC’s vehicle switching system.

The ACC line is also used in 4G S06U device to detect vehicle ignitions.

The ends are thin relay rolls and are placed respectively with thin white line and thin yellow line.

The thin white line is connected with the positive for vehicle power (+ 12 volts), and the thin yellow line is connected to the equipment control line.

Cut the positive line of the oil pump, tie it with the green coarse wire 87A, and connect it directly with the lock position.

The other side makes it connected with the end they have in common in lockdown mode (Green Coarse Wire 30).

Note: This product S06U 4G is equipped with 12V voltage, so it is suitable for battery power cars with 12V.